When used in heating, the power must be large enough!
36V power supply, the current should be more than 50A
24V power supply, the current should be more than 30A
12V power supply, the current should be more than 20A
PCB board size: 165 x 112 x 16mm (+-5mm)
1 x 1KW ZVS induction heating board with tesla coil and fan
Please take note : 1. Use protection power as far as possible, and do not use small current and unprotected switching power. 2. Don't use the battery. 3. When the working voltage is above 11V, the working voltage, that is, the input voltage connecting the coil or the heating object, is not the voltage when the power is unloaded. 4. A copper tube with water cooling must be used for long time use. a: The maximum mainframe output terminal can be installed with 10mm diameter copper tube. b: The copper tube with diameter less than 4mm can be fixed on copper tube and copper clips. c: The output terminals with diameter less than 2mm can be connected to the output terminals. 5. The heating power is less than 300W. This is mainly used for heating, the general high voltage power is less than 200W, and the high power is easy to be damaged. 6. The use of this plate requires certain practical and relevant knowledge. If the iron will not be used, the strength will not be divided into positive and negative points, it is suggested not to use.